Solutions / High Ammonia Nitrogen Wastewater Treatment
PALLIND · Water Treatment Solutions
High Ammonia Nitrogen Wastewater Treatment
Project-specific treatment concepts for ammonia-rich industrial wastewater, including removal and potential recovery routes.
Solution overview
Build the process around the ammonia load
PALLIND discusses membrane contactor and integrated treatment options for high-ammonia wastewater. The treatment route, chemical demand and achievable outlet quality require project-specific engineering review.
01
Feed conditioning
Assess suspended solids, organics, hardness and other constituents that may affect the ammonia-removal step.
02
Membrane contactor route
Review PTFE hollow fiber membrane contactors for controlled gas-liquid mass transfer and potential ammonia recovery.
03
Downstream integration
Coordinate polishing, water reuse and residual-stream management with the overall plant objective.
Project assessment
Information needed for process design
Share the project design basis so the treatment route and equipment configuration can be reviewed.
- Average and peak flow, operating schedule and temperature.
- Influent ammonia nitrogen concentration and variability.
- pH, alkalinity, suspended solids, COD and relevant ions.
- Required outlet concentration and discharge or reuse destination.
- Recovery objective, receiving solution, utilities and site constraints.
Project inquiry
Discuss the next step with PALLIND
Send the water analysis, capacity, treatment target, existing process and site constraints.
FAQ
Before developing a proposal
Can a treatment route be selected without a water analysis?
No. The process should be selected from verified water quality, flow, operating conditions and the required outlet or recovery target.
Are treatment results guaranteed by this page?
No. Project targets and guarantees require a confirmed design basis, model selection and supporting technical documentation.